Yellow is your board 3 setting. The cut-off corner goes at the top left.
Top four rows are filled squares (Laser Fill): columns are power 20, 40, 60, 80, 100 %; rows are 300 mm/s with 3 passes, then 2 passes, then 1 pass, then 450 mm/s with 1 pass. Bottom two rows are score lines (Laser Line) at the same powers: 100 mm/s, then 200 mm/s. The right-hand square of the top row (100 %, 300 mm/s, 3 passes) and of the first line row (100 %, 100 mm/s) are the board 3 settings (yellow in the picture); everything else is gentler.
Hold the card with the cut-off corner at the top left. Bambu Suite merges similar colours, so its colour chips can't pick out single squares. Each square's settings are written into the board's Bambu project by position when the board file is set up. The card outline is red and cuts with your normal settings.
| Where | Process | Power | Speed | Passes |
|---|---|---|---|---|
| Row 1, column 1 | Laser Fill | 20% | 300 mm/s | 3 |
| Row 1, column 2 | Laser Fill | 40% | 300 mm/s | 3 |
| Row 1, column 3 | Laser Fill | 60% | 300 mm/s | 3 |
| Row 1, column 4 | Laser Fill | 80% | 300 mm/s | 3 |
| Row 1, column 5 | Laser Fill | 100% | 300 mm/s | 3 |
| Row 2, column 1 | Laser Fill | 20% | 300 mm/s | 2 |
| Row 2, column 2 | Laser Fill | 40% | 300 mm/s | 2 |
| Row 2, column 3 | Laser Fill | 60% | 300 mm/s | 2 |
| Row 2, column 4 | Laser Fill | 80% | 300 mm/s | 2 |
| Row 2, column 5 | Laser Fill | 100% | 300 mm/s | 2 |
| Row 3, column 1 | Laser Fill | 20% | 300 mm/s | 1 |
| Row 3, column 2 | Laser Fill | 40% | 300 mm/s | 1 |
| Row 3, column 3 | Laser Fill | 60% | 300 mm/s | 1 |
| Row 3, column 4 | Laser Fill | 80% | 300 mm/s | 1 |
| Row 3, column 5 | Laser Fill | 100% | 300 mm/s | 1 |
| Row 4, column 1 | Laser Fill | 20% | 450 mm/s | 1 |
| Row 4, column 2 | Laser Fill | 40% | 450 mm/s | 1 |
| Row 4, column 3 | Laser Fill | 60% | 450 mm/s | 1 |
| Row 4, column 4 | Laser Fill | 80% | 450 mm/s | 1 |
| Row 4, column 5 | Laser Fill | 100% | 450 mm/s | 1 |
| Row 5, column 1 | Laser Line | 20% | 100 mm/s | 1 |
| Row 5, column 2 | Laser Line | 40% | 100 mm/s | 1 |
| Row 5, column 3 | Laser Line | 60% | 100 mm/s | 1 |
| Row 5, column 4 | Laser Line | 80% | 100 mm/s | 1 |
| Row 5, column 5 | Laser Line | 100% | 100 mm/s | 1 |
| Row 6, column 1 | Laser Line | 20% | 200 mm/s | 1 |
| Row 6, column 2 | Laser Line | 40% | 200 mm/s | 1 |
| Row 6, column 3 | Laser Line | 60% | 200 mm/s | 1 |
| Row 6, column 4 | Laser Line | 80% | 200 mm/s | 1 |
| Row 6, column 5 | Laser Line | 100% | 200 mm/s | 1 |
